WEFOKA PRODUCT SUPPORT

Installation & Setup Guides

Get the most out of your WEFOKA dash cam. Follow our step-by-step guides for installation, camera setup, connectivity, recording and everyday use.

START HERE

Make Every Setup Step Easier.

Installing a dash cam doesn't have to be complicated. Our installation center helps you understand the basic setup process, organize your cables and get your camera ready for the road. Always follow the instructions provided for your specific product model.

Before You Begin

  • Confirm your camera model and vehicle compatibility.
  • Review the product manual before installation.
  • Prepare the required cables and accessories.
  • Park safely and turn off the vehicle before wiring.
STEP-BY-STEP SUPPORT

Choose Your Installation Guide

Select the topic you need and follow the corresponding instructions below.

GUIDE 01

Front Camera Installation

Learn how to position your front camera, prepare the windshield and connect the power supply.

Read Installation Guide →
GUIDE 02

Front & Rear Camera Setup

Understand rear camera positioning, cable routing and connection to the main camera.

Read Installation Guide →
GUIDE 03

Wi-Fi & App Connection

Learn the general pairing process and how to access your camera's live view and recordings.

Read Setup Guide →
GUIDE 04

SD Card & Recording

Understand memory card installation, formatting, recording and basic storage management.

Read Setup Guide →
GUIDE 05

Parking Mode & Hardwire

Learn the basics of parking surveillance and important hardwire installation precautions.

Read Installation Guide →
GUIDE 06

Firmware & Troubleshooting

Understand software updates and basic troubleshooting for common camera issues.

Read Support Guide →
01

Front Dash Cam Installation

Start with a clean windshield and choose a mounting position that provides a clear road view without obstructing your vision.

STEP 01

Prepare the Windshield

Park your vehicle safely, switch off the engine and clean the selected mounting area. Allow the glass to dry completely before applying the mount.

STEP 02

Position the Camera

Place the camera in a suitable position near the rearview mirror where it has a clear view of the road. Check local regulations and avoid obstructing the driver's field of vision.

STEP 03

Connect the Power Cable

Connect the supplied power cable according to your model's manual. Use the designated power adapter and connection point.

STEP 04

Test Before Final Installation

Power on the camera and confirm that the display, recording and camera angle are working correctly before securing all cables.

Installation Reminder

Do not route cables across airbag deployment areas. Mounting locations and power connections may vary depending on your vehicle and camera model.

02

Front & Rear Camera Installation

For dual-camera systems, proper rear camera positioning and cable routing help ensure reliable front and rear coverage.

STEP 01

Choose the Rear Camera Position

Identify a suitable mounting position near the top center of the rear windshield, ensuring a clear view and avoiding obstructed areas.

STEP 02

Clean and Mount

Clean the mounting surface and install the rear camera according to the supplied mounting instructions. Adjust its angle for the best rear view.

STEP 03

Route the Rear Camera Cable

Route the cable along appropriate interior trim areas toward the front unit. Keep it away from airbags, moving parts and areas that may pinch the cable.

STEP 04

Connect and Test

Connect the rear camera to the designated port. Power on the system and check that both front and rear camera views are displayed or recorded.

Vehicle-Specific Reminder

Cable routing and rear camera mounting can vary between sedans, SUVs and hatchbacks. Follow the instructions supplied with your specific camera.

03

Wi-Fi & App Connection

Connect your compatible dash cam to a smartphone to access supported live view, playback and camera settings.

STEP 01

Find the Correct App

Check the product manual or packaging for the designated mobile application and its official download instructions.

STEP 02

Enable Camera Wi-Fi

Turn on the camera and activate its Wi-Fi function if supported. Refer to the model-specific manual for the correct activation method.

STEP 03

Connect Your Smartphone

Open your phone's Wi-Fi settings and select the camera network. Enter the password provided in the product instructions if required.

STEP 04

Open the Application

Launch the compatible application and follow the on-screen pairing instructions. Check live view and playback if supported by your model.

Connection Tip

Some smartphones may display a message indicating that the camera Wi-Fi network has no internet access. This can be normal for a direct camera connection. Follow your model's instructions to remain connected.

04

SD Card & Recording Setup

A compatible memory card is essential for stable video recording and reliable storage.

STEP 01

Check Card Compatibility

Check the supported MicroSD card type, capacity and speed requirements in your product manual. Requirements may vary between models.

STEP 02

Insert the Memory Card

Switch off the camera before inserting or removing the card. Follow the card orientation shown in the device instructions.

STEP 03

Format the Card

Use the camera's format function when available. Formatting erases existing data, so back up any important recordings first.

STEP 04

Check Recording

Power on the camera and confirm that recording starts normally. Review a short test clip to verify video and audio settings if applicable.

Important Memory Card Note

Do not assume all WEFOKA models support the same memory card capacity. Always use a card meeting the specifications of your exact model.

05

Parking Mode & Hardwire Setup

Parking surveillance may require a compatible hardwire kit and a supported camera model. Check compatibility before purchasing or installing additional accessories.

STEP 01

Confirm Compatibility

Verify that your camera supports parking mode and that the hardwire kit is compatible with your exact product model.

STEP 02

Review the Vehicle Power System

Check your vehicle's fuse box layout, power requirements and the hardwire kit's wiring instructions before beginning.

STEP 03

Install the Hardwire Kit

Follow the kit's wiring diagram and fuse specifications. Incorrect connections may damage vehicle electronics or the camera.

STEP 04

Verify Parking Mode

After installation, confirm that the camera switches to the supported parking mode according to the product instructions.

Safety First — Professional Installation Recommended

Hardwiring involves the vehicle electrical system. If you are unfamiliar with fuse boxes, vehicle wiring or electrical connections, seek assistance from a qualified professional. Incorrect installation can cause electrical damage or affect vehicle safety.

06

Firmware & Basic Troubleshooting

Keep your camera operating properly and learn how to handle common setup issues.

CHECK 01

Camera Will Not Power On

Check the power adapter, cable connection and vehicle power outlet. Test the supplied accessories according to the manual.

CHECK 02

Camera Is Not Recording

Confirm that the memory card is compatible, properly inserted and formatted. Check for storage or recording error messages.

CHECK 03

Wi-Fi Connection Problems

Restart the camera and phone, enable the camera Wi-Fi function and reconnect using the correct network details.

CHECK 04

Firmware Updates

Only use firmware files and update instructions specifically intended for your camera model. Never install an unverified firmware package.

Firmware Protection

Do not interrupt the power supply during a firmware update. If you cannot confirm the correct firmware version for your device, contact WEFOKA support first.

BEST PRACTICES

Get the Best From Your Dash Cam.

Simple habits that help maintain reliable recording performance.

Keep the Lens Clean

Use a soft microfiber cloth to remove dust and fingerprints from the camera lens.

Check Your Recordings

Periodically review recordings to confirm that the camera is operating as expected.

Maintain Your Memory Card

Back up important footage and format the card according to your model's instructions.

HELP CENTER

Installation Frequently Asked Questions

Quick answers to common installation and setup questions.

Where should I mount my front dash cam?
A suitable position is generally near the rearview mirror, where the camera has a clear view of the road without obstructing the driver's visibility. Always follow applicable local regulations.
Can I install my dash cam myself?
Many standard dash cam installations can be completed by following the supplied instructions. Hardwiring, complex dual-camera routing and vehicle-specific installations may require professional assistance.
What MicroSD card should I use?
Card capacity, speed and compatibility depend on your specific camera model. Check the product manual before purchasing a memory card.
Why can't my phone connect to the camera?
Make sure camera Wi-Fi is enabled and your phone is connected to the correct camera network. Follow the pairing instructions for your model.
Does every WEFOKA dash cam support parking mode?
Parking mode availability and functionality depend on the camera model and required accessories. Check the individual product specifications.
Can I use firmware from another camera model?
No. Always use firmware specifically intended for your exact device model and hardware version. Using incorrect firmware may cause the device to malfunction.
Where can I get help with installation?
Contact WEFOKA customer support at owen229210@gmail.com. Include your order number, camera model, vehicle details and a description of the installation issue.
WEFOKA CUSTOMER SUPPORT

Need a Hand With Your Installation?

Our support team is ready to help with product setup, installation questions and troubleshooting. Send us your camera model and vehicle information so we can better understand your needs.

Contact WEFOKA Support